Your VCR has an Energy Save feature which if set will place your VCR into an economic power save where the clock display will disappear. If you have programmed a recording, this feature will not work.
You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, and operational mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. Press OK/CLK/CNT to display.
CLEAR
Press
on the VCR.
The VCR and clock will appear in the video recorder�s display.
Press on the VCR again and your VCR will go into Energy Save. STANDBY indicator is lit.
After 3 seconds the display will clear only leaving the clock or tape counter and amount of tape left on the TV screen. Press OK/CLK/CNT again to remove all displays from the TV screen.
OK CLK/CNT
i
Press to switch off Energy Save.
VCR Channel Function/Speed Programme
STOP SP BBC1
1.01.00 SAT
12:00
Day/Month/ Year/Day of Week
Clock/Tape Counter & Amount of Tape Left
CLEAR
OK CLK/CNT
i
Press OK/CLK/CNT repeatedly to display the tape counter and amount of tape left. Tape counter and amount of tape left appear only while a tape is loaded.
29
